Sum Frequency Generation Spectra Research Articles

Neural Network-Based Sum-Frequency Generation Spectra of Pure and Acidified Water Interfaces with Air.

The affinity of hydronium ions (H3O+) for the air-water interface is a crucial question in environmental chemistry. While sum-frequency generation (SFG) spectroscopy has been instrumental in indicating the preference of H3O+ for the interface, key questions persist regarding the molecular origin of the SFG spectral changes in acidified water. Here we combine nanosecond long neural network (NN) reactive simulations of pure and acidified water slabs with NN predictions of molecular dipoles and polarizabilities to calculate SFG spectra of long reactive trajectories including proton transfer events. Our simulations show that H3O+ ions cause two distinct changes in phase-resolved SFG spectra: first, a low-frequency tail due to the vibrations of H3O+ and its first hydration shell, analogous to the bulk proton continuum, and second, an enhanced hydrogen-bonded band due to the ion-induced static field polarizing molecules in deeper layers. Our calculations confirm that changes in the SFG spectra of acidic solutions are caused by hydronium ions preferentially residing at the interface.

Theoretical basis for interpreting heterodyne chirality-selective sum frequency generation spectra of water.

Chirality-selective vibrational sum frequency generation (chiral SFG) spectroscopy has emerged as a powerful technique for the study of biomolecular hydration water due to its sensitivity to the induced chirality of the first hydration shell. Thus far, water O-H vibrational bands in phase-resolved heterodyne chiral SFG spectra have been fit using one Lorentzian function per vibrational band, and the resulting fit has been used to infer the underlying frequency distribution. Here, we show that this approach may not correctly reveal the structure and dynamics of hydration water. Our analysis illustrates that the chiral SFG responses of symmetric and asymmetric O-H stretch modes of water have opposite phase and equal magnitude and are separated in energy by intramolecular vibrational coupling and a heterogeneous environment. The sum of the symmetric and asymmetric responses implies that an O-H stretch in a heterodyne chiral SFG spectrum should appear as two peaks with opposite phase and equal amplitude. Using pairs of Lorentzian functions to fit water O-H stretch vibrational bands, we improve spectral fitting of previously acquired experimental spectra of model β-sheet proteins and reduce the number of free parameters. The fitting allows us to estimate the vibrational frequency distribution and thus reveals the molecular interactions of water in hydration shells of biomolecules directly from chiral SFG spectra.

Water dynamics and sum-frequency generation spectra at electrode/aqueous electrolyte interfaces.

The dynamics of water at interfaces between an electrode and an electrolyte is essential for the transport of redox species and for the kinetics of charge transfer reactions next to the electrode. However, while the effects of electrode potential and ion concentration on the electric double layer structure have been extensively studied, a comparable understanding of dynamical aspects is missing. Interfacial water dynamics presents challenges since it is expected to result from the complex combination of water-water, water-electrode and water-ion interactions. Here we perform molecular dynamics simulations of aqueous NaCl solutions at the interface with graphene electrodes, and examine the impact of both ion concentration and electrode potential on interfacial water reorientational dynamics. We show that for all salt concentrations water dynamics exhibits strongly asymmetric behavior: it slows down at increasingly positively charged electrodes but it accelerates at increasingly negatively charged electrodes. At negative potentials water dynamics is determined mostly by the electrode potential value, but in contrast at positive potentials it is governed both by ion-water and electrode-water interactions. We show how these strikingly different behaviors are determined by the interfacial hydrogen-bond network structure and by the ions' surface affinity. Finally, we indicate how the structural rearrangements impacting water dynamics can be probed via vibrational sum-frequency generation spectroscopy.

First-principles spectroscopy of aqueous interfaces using machine-learned electronic and quantum nuclear effects.

Vibrational spectroscopy is a powerful approach to visualising interfacial phenomena. However, extracting structural and dynamical information from vibrational spectra is a challenge that requires first-principles simulations, including non-Condon and quantum nuclear effects. We address this challenge by developing a machine-learning enhanced first-principles framework to speed up predictive modelling of infrared, Raman, and sum-frequency generation spectra. Our approach uses machine learning potentials that encode quantum nuclear effects to generate quantum trajectories using simple molecular dynamics efficiently. In addition, we reformulate bulk and interfacial selection rules to express them unambiguously in terms of the derivatives of polarisation and polarisabilities of the whole system and predict these derivatives efficiently using fully-differentiable machine learning models of dielectric response tensors. We demonstrate our framework's performance by predicting the IR, Raman, and sum-frequency generation spectra of liquid water, ice and the water-air interface by achieving near quantitative agreement with experiments at nearly the same computational efficiency as pure classical methods. Finally, to aid the experimental discovery of new phases of nanoconfined water, we predict the temperature-dependent vibrational spectra of monolayer water across the solid-hexatic-liquid phases transition.

Vibrational dynamics and spectroscopy of water at porous g-C3N4 and C2N surfaces.

Porous graphitic materials containing nitrogen are promising catalysts for photo(electro)chemical reactions, notably water splitting, but can also serve as "molecular sieves". Nitrogen increases the hydrophilicity of the graphite parent material, among other effects. A deeper understanding of how water interacts with C- and N-containing layered materials, if and which differences exist between materials with different N content and pore size, and what the role of water dynamics is - a prerequsite for catalysis and sieving - is largely absent, however. Vibrational spectroscopy can answer some of these questions. In this work, the vibrational dynamics and spectroscopy of deuterated water molecules (D2O) mimicking dense water layers at room temperature on the surfaces of two different C/N-based materials with different N content and pore size, namely graphitic C3N4 (g-C3N4) and C2N, are studied using ab initio molecular dynamics (AIMD). In particular, time-dependent vibrational sum frequency generation (TD-vSFG) spectra of the OD modes and also time-averaged vSFG spectra and OD frequency distributions are computed. This allows us to distinguish "free" (dangling) OD bonds from OD bonds that are bound in a H-bonded water network or at the surface - with subtle differences between the two surfaces and also to a pure water/air interface. It is found that the temporal decay of OD modes is very similar on both surfaces with a correlation time near 4 ps. In contrast, TD-vSFG spectra reveal that the interconversion time from "bonded" to "free" OD bonds is about 8 ps for water on C2N and thus twice as long as for g-C3N4, demonstrating a propensity of the former material to stabilize bonded OD bonds.

Theoretical Study of the Two-Dimensional Vibrational Sum Frequency Generation Spectroscopy of the Air-Water Interface at Varying Temperature and Its Connections to the Interfacial Structure and Dynamics.

We performed a theoretical study of the temperature variation of two-dimensional vibrational sum frequency generation (2D-VSFG) spectra of the OH stretch modes at air-water interfaces in the mid-IR region. The calculations are performed at four different temperatures from 250 to 325 K by using a combination of techniques involving response function formalism of nonlinear spectroscopy, electronic structure calculations, and molecular dynamics simulations. Also, the calculations are performed for isotopically dilute solutions so that the intra- and intermolecular coupling between the vibrational modes of interest can be ignored. We have established the connections of temperature variation of various frequency- and time-dependent features of the calculated spectra to the changes in the underlying structure and dynamics of the interfaces. The results reveal that interfacial water is dynamically more heterogeneous than bulk water, with three dominant dynamical processes exhibiting their corresponding time-dependent features in the 2D-VSFG spectrum. These are the spectral diffusion of hydrogen-bonded OH groups at the interface, conversion of an initially hydrogen-bonded OH group to a dangling OH which is a stable state for surface water, unlike the bulk water, and the third one, which involves the conversion of an initially free or dangling OH group to its hydrogen-bonded state at the interface. The temporal appearance of the cross peaks corresponding to interconversion of the hydrogen-bonded state to the dangling state or vice versa of an interfacial OH group is found to take place at a slower rate than the dynamics of spectral diffusion of hydrogen-bonded molecules at the interface, which, in turn, is slower than the corresponding spectral diffusion of bulk water molecules. The temperature variation of these dynamic processes can be linked to the decay of appropriate hydrogen-bond and non-hydrogen-bond time correlation functions of interfacial water molecules for the different air-water systems studied in this work.

Umbrella-like Helical Structure of α-Synuclein at the Air-Water Interface Observed with Experimental and Theoretical Sum Frequency Generation Spectroscopy.

The misfolding of α-synuclein (αS) into amyloid aggregates is catalyzed by hydrophobic surfaces and associated with severe brain disorders, such as Parkinson's disease. Despite the important role of interfaces, the three-dimensional structure of αS at the interfaces is still not clear. We report interface-specific sum frequency generation (SFG) experiments of monomeric αS binding to the air-water interface, a model system for the important hydrophobic surfaces. We combine the SFG spectra with calculations of theoretical spectra based on molecular dynamics simulations to show that αS, which is an intrinsically disordered protein in solution, folds into a defined, mostly helical secondary structure at the air-water interface. The binding pose resembles an umbrella shape, where the C-terminus protrudes into the water phase, while the N-terminus and the NAC region span the canopy at the interface. In this binding pose, αS is prone to aggregate, which could explain the catalytic effect of hydrophobic interfaces and air bubbles on αS fibrillation.

Dimethylpiperazine on Air-Water Interface: Vibrational Sum frequency Generation study of a cyclic tertiary amine

Dimethyl piperazine (DMP) is a weakly basic, cyclic, tertiary diamine. Being a saturated 6-membered ring, it may attain a number of energetically close conformational orientations in the ground state. In a particular environment, its conformational distribution depends on the stabilising factors present in the surroundings. Though soluble in water, it is expected to have substantial surface propensity due to presence of multiple –CH2 and –CH3 bonds. Detection of Bohlmann bands in the C–H stretch region of the Vibrational Sum Frequency Generation (VSFG) spectrum revealed that comparatively higher energy chair conformer with one axial and one equatorial –CH3 bond is present on the pure liquid DMP-air interface. At the air-aqueous solution interface, those bands were found to disappear as the lone electron pair on N-atom is engaged in hydrogen bonding with water molecule. Due to this hydrogen bonding, the peak of “dangling free OH” bonds disappeared from VSFG spectrum of water molecules at air–water interface. Alongwith this hydrogen bonding, the hydrophobic nature of the –CH3 bonds of DMP molecules cause disorganisation of native hydrogen bonded network of water molecules in the air–water interface. Structure and orientation of DMP is expected to be pH-responsive since the chemical conditions of the surrounding medium directly affect the extent of protonation of the amine group. Upon addition of HCl to the bulk, protonated DMP ions, too, could be detected on the air-solution interface by their VSFG spectrum which were considerably different from unprotonated DMP. As the bulk pH of solution changed towards more acidic, spectral features of VSFG spectra of DMP on the surface showed significant change, implying variation in the surface pH, as structure and orientation changes at different degrees of protonation. Since the VSFG spectral features of DMP was found to be pH-responsive, it can be utilised to ascertain the pH of any surface that has DMP absorbed on it. pH-sensitivity of the DMP molecules on air–water interface also suggest that orientation of headgroups will have some effect on the surface orientation of cationic surfactants with amine based headgroups.

Computational Investigations of the Water Structure at the α-Al2O3(0001)-Water Interface.

The α-Al2O3(0001)-water interface is investigated using ab initio molecular dynamics (AIMD) simulations. The spectral signatures of the vibrational sum frequency generation (vSFG) spectra of OH stretching mode for water molecules at the interface are related to the interfacial water orientation, hydrogen bond network, and water dissociation process at different water/alumina interfaces. Significant differences are found between alumina surfaces at different hydroxylation levels, namely, Al-terminated and O-terminated α-Al2O3(0001). By calculating the vibrational sum frequency generation spectrum and its imaginary component from AIMD results, the structure of interfacial waters as well as the termination of alumina slab are related to the spectral signatures of vSFG data.

Evidence for Ion Association at the Gas-Liquid Interface of the Mixture of 1-Butyl-3-methylimidazolium Hexafluorophosphate and Benzonitrile: A Sum Frequency Generation Spectroscopy and Surface Tension Study.

The gas-liquid interface for the mixtures of [BMIM][PF6] and benzonitrile is studied by sum frequency generation (SFG) spectroscopy and surface tension measurements as an important solute to reduce the viscosity of ionic liquids. Solvation of ionic compounds in bulk solvent is not necessarily the same as that at the surface due to the lower dielectric medium at the air/liquid interface. The results from the temperature-dependent SFG spectroscopy and surface tension study suggest that the ionic liquid in a benzonitrile solvent is associated as ion pairs at the surface rather than as dissociated─solvated─ions in the bulk solution. The influence of ionic liquids on the surface structure of benzonitrile is investigated from 0 to 1.0 mole fraction of benzonitrile. The CH stretching mode of vibration of benzonitrile in the SFG spectrum begins from a 0.2 mole fraction (x) of benzonitrile, and the intensity of the peak constantly increases on increasing the concentration of benzonitrile. However, the addition of benzonitrile does not result in extra peaks or shifting of the peak frequency to the spectra of [BMIM][PF6]. The surface tension measurements further support the presence of benzonitrile at the gas-liquid interface. The surface tension data of the mixture smoothly decrease as the benzonitrile concentration increases. The apparent tilt angle of the terminal methyl group of the cation of [BMIM][PF6] is calculated from SFG polarization spectra and shows an apparent lowering with the addition of benzonitrile. The effect of temperature on the surface structure of the binary mixture is also reported at four different temperatures between -15 and 40 °C for both the SFG spectroscopy and surface tension study. Benzonitrile shows different behavior in the mixture at higher temperatures than pure benzonitrile, as observed in the SFG spectra. In contrast, it does not show any CN peak in the mixture below 0.9 mole fraction. The temperature dependence of the interfacial tension is used to evaluate thermodynamic functions such as surface entropy and surface enthalpy. Both were found to be lowered with the increasing concentration of benzonitrile. Both spectroscopic and thermodynamic analyses indicate that the ionic liquid is highly associated as ion pairs and the benzonitrile is more ordered at the surface at concentration <0.4×.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane.

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Transferability of vibrational spectroscopic map from TIP4P to TIP4P-like water models.

We computed the IR, Raman, and sum frequency generation spectra of water in the OH-stretch region by employing the quantum/classical mixed approach that consists of a vibrational spectroscopic map and molecular dynamics (MD) simulation. We carried out the MD simulation with the TIP4P, TIP4P/2005, and TIP4P/Ice models and applied the map designed for TIP4P by Skinner et al. to each MD trajectory. Although the map is not tuned for TIP4P-like models, TIP4P/2005 and TIP4P/Ice provide the best reproduction of the experimental vibrational spectra of liquid water and crystalline ice, respectively. This result demonstrates the transferability of the map from TIP4P to TIP4P/2005 and TIP4P/Ice, meaning that one can choose an appropriate TIP4P-like model to calculate the vibrational spectra of an aqueous system without rebuilding the map.

Time-dependent band position difference between vibrational sum and difference frequency generation: a phenomenon originating from dispersion in the visible pulse.

Vibrational spectroscopy is significant for identifying chemical specification. Here, the spectral band frequencies corresponding to the same molecular vibration in sum frequency generation (SFG) and difference frequency generation (DFG) spectra present delay-dependent deviation. Through numerical analysis of time resolved SFG and DFG spectra with a frequency marker in the incident IR pulse, the frequency ambiguity was not caused by any structure and dynamic variation on the surface, but from the dispersion in the incident visible pulse. Our results provide a helpful method to correct the vibrational frequency deviation and improve the assignment accuracy for SFG and DFG spectroscopies.

Selective Action of Antimalarial Hydroxychloroquine on the Packing of Phospholipids and Interfacial Water Associated with Lysosomal Model Membranes: A Vibrational Sum Frequency Generation Study.

Understanding the structural change of lysosomal membranes induced by hydroxychloroquine (HCQ) drug is essential as it has been considered as one of the probable mechanisms of its antimalarial action. In this context, vibrational sum frequency generation (VSFG) spectra of the O-H region of water and C-H of the hydrocarbon chain of negatively charged and zwitterionic phospholipids associated with the lysosomal membrane in the absence and presence of different concentrations of HCQ have been measured at the air/water interface. The interfacial water at the negatively charged and zwitterionic lipids gets restructured in the presence of HCQ; however, the mechanism of restructuring is different due to the charge of the head groups of lipids. Interestingly, the presence of HCQ leads to a disorder in the negatively charged lipids, irrespective of their chemical nature, mainly by creating the gauche defect in the hydrocarbon chain of the lipid. In contrast, the ordering of the zwitterionic lipid does not show any appreciable change with the addition of HCQ. The finding on the selectivity of HCQ in affecting the ordering of the lipid depending on its head group charge and restructuring of interfacial water may be useful in understanding the molecular level mechanism of the antimalarial action of HCQ.

On the Fresnel factor correction of sum-frequency generation spectra of interfacial water.

Insights into the microscopic structure of aqueous interfaces are essential for understanding the chemical and physical processes on the water surface, including chemical synthesis, atmospheric chemistry, and events in biomolecular systems. These aqueous interfaces have been probed by heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy. To obtain the molecular response from the measured HD-SFG spectra, one needs to correct the measured ssp spectra for local electromagnetic field effects at the interface due to a spatially varying dielectric function. This so-called Fresnel factor correction can change the inferred response substantially, and different ways of performing this correction lead to different conclusions about the interfacial water response. Here, we compare the simulated and experimental spectra at the air/water interface. We use three previously developed models to compare the experiment with theory: an advanced approach taking into account the detailed inhomogeneous interfacial dielectric profile and the Lorentz and slab models to approximate the interfacial dielectric function. Using the advanced model, we obtain an excellent quantitative agreement between theory and experiment, in both spectral shape and amplitude. Remarkably, we find that for the Fresnel factor correction of the ssp spectra, the Lorentz model for the interfacial dielectric function is equally accurate in the hydrogen (H)-bonded region of the response, while the slab model underestimates this response significantly. The Lorentz model, thus, provides a straightforward method to obtain the molecular response from the measured spectra of aqueous interfaces in the H-bonded region.

Vibrational Sum Frequency Generation Spectra of Water-Vapor Interfaces Covered by Alcohols: Effects of Surface Coverage and Coupling between Oscillators.

The present study deals with the effects of varying coverage of water surface by alcohols on the vibrational sum frequency generation (VSFG) spectrum of interfacial water. We have considered two different alcohols: Tertiary butyl alcohol (TBA) whose alkyl part is fully branched and stearyl alcohol (STA) which has a long linear alkyl chain with larger hydrophobic surface area than that of TBA. With increase of the alcohol concentration, the hydrogen bonded OH stretch region of the VSFG spectrum is found to change following a regular trend for the STA-water system, whereas non-monotonic variation of the VSFG spectrum is observed for the TBA-water system which can be correlated with the presence of very different interactions of TBA molecules at different concentrations. On increasing the concentration of TBA, the hydrophobic groups get more tilted towards the water phase and significant hydrophobic interactions are introduced at higher concentrations. Whereas, for STA, there is a gradual increase in the hydrophilic interaction. Because of stacking interactions between the long chain alkyl groups, the hydrophobic parts stay outward from the water phase at higher concentrations and a regular change in the VSFG spectrum is observed. We have also presented a computationally efficient scheme to calculate the VSFG spectrum of interfacial systems for coupled oscillators which is expected to be beneficial for the treatment of coupling where the interfacial system size is inherently large.

Direct observation of oil-surface adhesion via sum frequency generation spectroscopy

ABSTRACT Adhesive technology can joint dissimilar lightweight materials that are used in the automotive industry to improve fuel efficiency. However, the strength of the adhesive bonding is often reduced by oil contaminants on the adherend surfaces. Adhesives should repel the oil layer and diffuse onto the adherend surface, but there is no general design for reliable adhesion on contaminated adherends because of the poor molecular-level understanding of oil-surface adhesion. Here, we report the direct observation of oil-surface adhesion at a two-part epoxy adhesive/aluminum oxide (AlOx) interface via sum frequency generation (SFG) spectroscopy, a method that can probe buried interfaces. The AlOx surface is intentionally contaminated with commercial silicone oil. The SFG spectra of the cured epoxy adhesive/oil-contaminated AlOx interface suggest that the silicone oil remains after curing, explaining the reduction in adhesion strength. Triethylenetetramine, a hardener used in this study, can repel the oil layer, whereas bisphenol A epoxy resin is much less effective at removing the oil layer upon contact. Thus, the migration of both adhesive components onto the AlOx surface is key to securing sufficient oil-surface adhesion. We also applied SFG to second-generation acryl adhesive (SGAA)/AlOx interface and found that SGAA completely repels the oil from the aluminum interface.

Probing the Gold/Water Interface with Surface-Specific Spectroscopy.

Water is an integral component in electrochemistry, in the generation of the electric double layer, and in the propagation of the interfacial electric fields into the solution; however, probing the molecular-level structure of interfacial water near functioning electrode surfaces remains challenging. Due to the surface-specificity, sum-frequency-generation (SFG) spectroscopy offers an opportunity to investigate the structure of water near working electrochemical interfaces but probing the hydrogen-bonded structure of water at this buried electrode-electrolyte interface was thought to be impossible. Propagating the laser beams through the solvent leads to a large attenuation of the infrared light due to the absorption of water, and interrogating the interface by sending the laser beams through the electrode normally obscures the SFG spectra due to the large nonlinear response of conduction band electrons. Here, we show that the latter limitation is removed when the gold layer is thin. To demonstrate this, we prepared Au gradient films on CaF2 with a thickness between 0 and 8 nm. SFG spectra of the Au gradient films in contact with H2O and D2O demonstrate that resonant water SFG spectra can be obtained using Au films with a thickness of ∼2 nm or less. The measured spectra are distinctively different from the frequency-dependent Fresnel factors of the interface, suggesting that the features we observe in the OH stretching region indeed do not arise from the nonresonant response of the Au films. With the newfound ability to probe interfacial solvent structure at electrode/aqueous interfaces, we hope to provide insights into more efficient electrolyte composition and electrode design.

Potential dependent friction: Role of interfacial hydrated molecules

The behavior of water molecules at the electrode/aqueous interfaces plays a fundamental role in tribological properties under the regulation of electric potentials. Reversible potential-modulated friction on the gold electrodes is demonstrated by utilizing electrochemical atomic force microscopy (EC-AFM). Applying positive potentials results in an increase in friction compared to that observed under the negative potentials. The stronger intensity of the water signals is detected by the sum-frequency generation (SFG) spectroscopy when the positive potential is applied on the gold surface, mainly ascribed to the absorption of hydrated anion molecules, therefore resulting in weak hydration effects. The electrochemical SFG spectra provide direct experimental evidence to elucidate the underlying mechanisms of potential-dependent friction, which might be related to the arrangement of hydrated cation or anion molecules and surface interactions. This work provides more insights into the molecular-level understanding of tribological behavior on the charged surfaces.

Molecular Signature of an Unexpected Hydrophobization of Silica Surfaces in Lead Nitrate Solutions as Detected by Sum Frequency Generation Spectroscopy

Responsive silica surfaces empower their smart applications for catalysis, mass transfer, and self-cleaning. Here, we reveal the molecular signature of an unexpected hydrophobization of silica surfaces as their pH response in a lead nitrate solution. Strikingly, the pH-dependent sum frequency generation (SFG) spectra of silica surfaces show two profound minima of the intensity at pH = 7.2 and 10.2, respectively. Our in-depth analysis of SFG spectra using the maximum entropy method show emerging vibrational bands at >3600 cm–1 for the surface-bound water at this pH range, which are similar to the stretching modes of the dangling OH at the air–water surface. The observed minima in SFG intensity and the occurrence of the “hydrophobic-like” stretching modes of interfacial water provide a molecular fingerprint of the hydrophobicity of the silica surfaces, which is confirmed by contact angle measurements. These step-change findings help better deal with silica-related processes in nature and technologies.